Cleaning roof shingles is an easy way to make sure your roof is in tip-top shape. It is the most neglected roofing repair job you can do on your home and you can do it yourself without calling in a professional. Here’s how to do it:
Cleaning Roof Shingles – The simplest way to remove stains from your roof is with a combination of TSP (toluene phosphate) and water. This combination can damage your sensitive vegetation so be very careful. A good ratio to use is 1 pint of bleach to a quart of water and use a soft, clean rag! The power washing solution will damage the delicate fibers on the roof so don’t use anything too hard or abrasive.
Using a mixture of lemon juice and salt can help in removing stains from cleaning roof shingles. Rub the mixture onto the stains and leave it overnight. Rinse it off in the morning with fresh water. This may not remove the stain but it will lighten the shade.
If you have moss growing on your roof, one way to clear it up is with salt and water. Before starting your cleaning regimen, spray the roof with a mold solution. Allow it to sit for an hour before scrubbing it. Do not wipe the solution on the roof as it will spread the moss growth and cause the roof to decay. Wipe it off instead by spraying it on areas of the roof that are not exposed to sunlight. The salt and water will loosen the moss growth and cause it to disintegrate.
If there are spots of moss on your roof where you cannot reach to clean them yourself, you may want to call a roof cleaning company to remove them for you. Some roofing companies will be able to spray their cleaning solutions on large areas of roofs to wash away the moss without damaging the roof itself. However, if your roof has small spots, then you may need to use a broom to wash away the moss and make it lighter.
Cleaning your roof will improve your home’s curb appeal because a properly shaded roof will increase its marketability. When people see a clean roof, they are more likely to walk onto your property. Also, when your roof is not properly maintained, it will look dirty and dingy, which can make it unlivable. By hiring a professional roofer, you can rest assured that your roof will always be pristine, clean, and sparkling with new tile.
For roof leaks, the process of pressure washing is often used. When pressure washing, the contractor will spray the roof with a chemical that breaks down the water seal between the tiles, as well as between the shingles. This process removes all of the grime and dirt that accumulate over time from being in close contact with water for an extended period of time. After pressure washing, the roof might need to be treated again with a chemical to prevent future roof leaks.
Softening or deodorizing molds and mildew are also important. Mold and mildew damage not only deteriorate the aesthetic appeal of the roof, but can also create health problems. The mold builds up in warm, damp places like the ceiling, where there is little air circulation. When you have a roof that experiences a lot of humidity, there is a higher likelihood for mold and mildew build up. A good contractor will work to find the source of the moisture so that the moisture can be prevented or at least mitigated.
If you are cleaning a roof that already has moss and mildew, there are a few things that you will want to avoid. Do not scrape the moss and mildew away from the shingles because this can damage them. Do not use a large bladed tool to scrape at the moss and mildew either. It is possible to scratch the roofing materials, but when you do scratch the roofing materials, you may end up causing more issues. Instead, take a razor or other non-bladed instrument to the moss and mildew and gently scrape it away.
Once you have removed the moss and mildew from the roof, you may want to inspect for any remaining debris. Any debris that remains after you have cleaned the roof shingles will need to be removed. One way to do this is to make a bucket of warm water and a gentle detergent. Fill the bucket with the debris and scrub it gently. Make sure that you rinse the roof thoroughly in order to remove any remaining algae or dirt that may remain.
When you are finished cleaning the roof, it is important to leave it dry. Do not let the roof to dry completely as it can cause damage to the roof. You can help the roof dry by using fans to circulate the air in the area. In addition, consider calling a roofing professional to give you an estimate on how much work is required to complete the job. When you have the estimate in hand, you will be able to negotiate a price that is both affordable and effective.