Rubber roof seam repair is something that you need to pay attention to if you have rubber roofing. The rubber roof is made up of a thick substance that forms the roofing material, which is known as rubber or thermoplastic polyisoprene (TPU). This thick rubber is then combined with a thin clear sealant that prevents water from seeping into the seams and providing an environment that is very conducive to the growth of mould and mildew. In fact, the mould and mildew can actually grow faster than the rubber, which means that you will have a problem on your hands if you don’t take the necessary measures to prevent it.
Rubber roof repair is one of the easiest roof repairs to tackle, but it also has its own complications that you will need to deal with. For starters, the rubber roof repair is not the best option for all types of roof surfaces. The rubber roof repair is best suited for flat roofs. For instance, you should not perform rubber roof repair on polyethylene roof surface because such roofing systems are not flatter than flat roofs. Also, you should not perform rubber roof repair on any roof surface that slopes at any angle. For instance, you shouldn’t perform rubber roof repair on roof surface that slopes at an inclined angle because this will only put you in a situation where moisture can get accumulated and cause damage to the roofing system itself.
If the roof you are repairing is flat roof, then rubber roof seam repair is usually the right solution. If you have a low slope roof, then rubber roof repair is the best solution. The rubber roof seam repair will help you make the roof flat enough to handle snow and ice accumulation. In addition, rubber roof repair can help you remove excess water if you have a roof that collects water during the day and then holds back that water when the sun goes down. This way, you can have a roof free of dampness during the day and yet dry out properly when the sun goes down.
Before you start the repair, you need to clean the rubber roofing system first. You can use a high pressure sprayer for this purpose. Make sure that the sprayer has no foam in it. You need to do a thorough cleaning of the roofing system, including the roof membrane and the support structure beneath it.
After you have cleaned the roof surface, you should use an adhesive for repairing the roof seams. Make sure that you apply a very thick amount of the adhesive. Also, make sure that you leave ample time for the adhesive to set. The thickness of the adhesive will depend on the particular condition of the roof surface. If possible, try to cover the entire repair area with a layer of the adhesive.
Next, you should repair the rubber gutter that connects the roof to the rest of the house. It is common for rubber sheets to get wet during humid weather. You can fix this by using a roll of plumbers tape and stapling the gutter to the roof. If the rubber gutter becomes wet, you can just peel it off. Then, you should use the lap sealant to seal the gutter.
Last, but not least, the roof repair can be done by using roof repair tape. For this job, you should first remove the excess roofing and any other materials like tar paper or felt that are around the rubber roof seams. Then, you should cut strips of the tape and spread them evenly along the roof repair area. The purpose of doing this is to fill in the gaps of the damaged areas and to make the rest of the roofing system look smooth.
After you have finished the roofing repairs, you should immediately apply a sealant to the rubber roof repair. This will prevent future water intrusion into the same area. This will also help to protect the roof from leaks. After applying the sealant, you should wait for at least fifteen minutes before opening the area. During the waiting time, you can also open some of the windows if you want some fresh air. If you follow these simple tips, you can easily do roof repair without having to spend a lot of money and time.