Cedar shingles are popular for many reasons. For starters, they’re quite cheap and you can buy them at practically any home improvement store. Also, they can give your roof a rustic, woodsy look that’s both distinctive and attractive. Unfortunately, they are also vulnerable to the damage caused by weather. It’s necessary, therefore, to learn how to make use of this characteristic in order to make the most of roof repair jobs.
There are two main methods of repairing cedar shingle overlaps. The first is called overlaying and the second is called stapling. Let’s take a look at these repair techniques. Both involve attaching the overlapping shingles to the roof, but the way in which they do this differs dramatically.
Overlaying roof repair involves using large pieces of board on top of the roofing material. This is done to create valleys between the roofing materials, which will allow you to slide the shingles easily over the top of the roof. This can be done while the roofing material is still on the roof, as long as there is no moisture present. The reason why this method is often used for roof repair work is because it’s relatively easy and quick. It’s also relatively inexpensive.
However, if the roof has any sort of moisture on it, such as rain or snow, the process can be a bit messy. In addition to the wetness from the rain or snow, it’s also possible that you’ll end up with splinters by knocking off the shingle. Another drawback of using overlays is the fact that you have to remove the old shingles before you put on the new ones. This can take longer than simply installing a roof cover would.
There is an alternative to using this method of roofing work. Instead of using shingles, you can use either asphalt or tar roofs. This is a faster and easier way to go about repairing a roof. Plus, when you’re done with your roofing work, you won’t have to worry about the hassle of removing the old shingles, since the tar or asphalt roofing material will protect them from getting damaged.
If you choose this method, be sure to check to make sure you’re working with solid, level surfaces. If you use overlays on a roof that has drainage issues, the shingles could become dislodged, which would allow water to get under them and cause the roof to cave in. You don’t want to have to pull all of the shingles out of the roof in order to fix the problem, so take your time when working on the project. Make sure you measure the area where you will put the overlays in order to be sure you have enough material to go around the outside perimeter of the roof.
When installing the cedar shingle overlap, make sure you nail all of the nails through the shingles and into the attic rafters. Otherwise, you might have to cut away some of the shingles to get the nails in. When you are installing the shingles, use the right kind of nails for the job. Try to keep nails at least six inches long. It is always better to go slow when doing roofing projects, since you don’t want to have any shingles coming loose and falling off of the roof before you are ready to finish.
When you are installing the cedar shingle overlays, remember to use roofing nails guide to make sure you nail the shingles in the right direction. The last thing you want is to have a loose shingle on your roof that you have to pull off to finish the job. Another good idea is to make sure your roof is dry before you start hammering the shingles in. A dry roof will make the job go faster, and you won’t have to wait as long to finish putting the shingles on over the cedar shingle overlays.