Are you having problems with your house roof and wondering how to fix lead flashing to brickwork? This is a problem that can be fixed easily and without too much hassle. If you are living in Australia then this should not worry you too much as the quality of the material will not be affected as compared to the US and UK. The only problem that you might encounter is when you are using a non-standard mortar mix. If you are not sure of the mix that you use then you can always ask the manufacturer or get advice from an experienced roofer.
How to fix lead flashing to brickwork is not a difficult task if you have the right tools, materials and a plan. First of all you will have to identify where the problem lies. This might not be easy to do because the problem could be in several places. It might be in the mortar joints or the flashing around it. In such cases you will need to remove some sections of your roof and check out these joints for damage or rot.
Minor damage could be nothing to worry about. You might have to just replace the joint. A damaged joint could just require some sanding or grinding before you can re-place the joint. But more extensive damages will definitely require some reparation work. Here are some examples of extensive damage that could be repaired easily.
Roof leaks are the most common problem associated with brickwork. The simplest way of fixing the same is by placing felt under the joint. You can just use the same material that you use for the rest of the roof. However, if the leak is in a particular area then you will have to replace the entire joint. You can also repair minor roof leaks using gravel and silicone. Just dip the end of a stick into the silicone and then try to fix the joint.
Another important question that you might have while asking how to fix lead flashing to brickwork is how long will it take to replace the joint. Replacing a joint that has become corroded or is completely rotten is not an easy job. If you cannot find the materials in the nearest store then you will have to order them online.
How to fix a crack or some other kind of flashing problem at a single point is not possible. This is because replacing a flashing in an area that is difficult to access will mean disrupting your working schedule. It will be extremely difficult to repair such a large area without having to walk around the entire area. In such a scenario, it makes sense to find out a professional brickwork contractor who will do the repair job for you. By using qualified professionals, you will not only get the job done but will also be able to stop using your home for weeks or months while the work is being carried out.
The final topic on the topic of how to fix lead flashing to brickwork is how to get the job done without causing any permanent damage. Most people tend to ask this question when their home is flooded. Even if you cannot see the water dripping from the joints, you should focus on preventing the same thing from happening in the future. Waterproofing your house to prevent such incidents is a smart idea and you will have to spend a lot of money in the process. However, if you learn how to fix lead flashing to brickwork effectively, you will never have to think about water damages in the near future.
Most people do not know how to fix lead flashing to brickwork correctly. If you want to make sure that you get the job done properly, you should always contact professionals for help. They will be able to give you the best possible advice so that your property is protected from future problems. No matter how careful you are with your properties, it is possible that you could still end up with leaks and water damage in the future.